Volume 10, Issue 4 (Vol. 10, No. 4 Winter 2017 2017)                   2017, 10(4): 3767-3792 | Back to browse issues page


XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Moradi M, Hamidi A, Tavakoli Mehrjardi G. Shear Strength of Fiber-Reinforced Clayey Sands. Journal of Engineering Geology 2017; 10 (4) :3767-3792
URL: http://jeg.khu.ac.ir/article-1-2572-en.html
1- , hamidi@khu.ac.ir
Abstract:   (7479 Views)

Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining pressure (100 kPa, 200 kPa and 300 kPa) were investigated. It has been observed that addition of clay particles to the sands decreased the shear strength of samples. Also, increase in clay content reduced dilation and increased compressibility of the mixed soil. Addition of the fiber to both sands and clayey sands samples improved the shear strength and increased ductility and axial strain at failure point. 

Full-Text [PDF 838 kb]   (2112 Downloads)    
Type of Study: Case-Study | Subject: Geotecnic
Received: 2016/10/23 | Accepted: 2016/10/23 | Published: 2016/10/23

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Journal of Engineering Geology

Designed & Developed by : Yektaweb