Search published articles


Showing 3 results for Hasani

Maryam Rezaei, N. Hasani, A. Khorsandi, A. Rezaei,
Volume 9, Issue 3 (12-2015)
Abstract

Several studies show that during and before the earthquake, ground water existing in layers of the earth crust undergoes physical and chemical changes. These changes are recorded by measurement devices and known as "Geohydrological Precursors". Based on the studies conducted in this field, earth electromagnetic field waves experience fluctuations during and even before happening of the earthquake, which are called "magnetic anomalies". This type of anomaly is known as "geomagnetic precursor" within the scope of earthquake knowledge. S, the aim of this study is to assess the feasibility of making a connection between two groups of earthquake precursors (hydrological and geomagnetic precursors). In the present research, a series of tests has been done in order to investigate the effect of magnetic fields on physical and chemical properties of water, including Electrical Conductivity (EC), Total dissolved solids (TDS), Height of Water (HW). The tests were designed and conducted to be used in short-term and middle-term earthquake prediction. Analysis of the experimental results using statistical tests indicates that there is a partial meaningful relationship between magnetic fields (geomagnetic precursor) and physical and chemical properties of water (hydrological precursors), with the confidence coefficient equal to 95 percent
Ata Aghaei Araei1, Nahid Attarchian, Ahmadreza Ghodrati Ghazaani, Hossein Haddad, Amir Saeid Salamat, Hossein Hasani,
Volume 13, Issue 4 (Vol. 13, No. 4 2019)
Abstract

Introduction
One-dimensional site response analysis is widely performed to account for local site effects during an earthquake. Most of these approaches assume that dynamic soil properties are frequency independent. Laboratory test results as well as in-situ testing show that shear modulus and damping ratio are dependent on the frequency of loading. Although the amplification factor at ground surface with respect to frequency dependent dynamic properties of mixed alluvium materials under different near-fault motions with various velocity period is recognized, it is not well characterized and quantified.
Material and analysis methods
In this study, the tests results of samples which obtained from the drilling borehole (BH14) form Pardis city in Iran, are used. The soil is classified as clayey of high plasticity/clayey sand (CH/SC) and almost uniform and similar in the whole log profile.
Shear modulus and damping ratios versus shear strain curves (ASTM D3999) of CH/SC natural materials at effective confining pressures of 1, 2 and 5 kg/cm2 with frequency of 0.5, 2, 5, and 10 Hz were used in one dimension response analyses using EERA Code.
Generally the damping ratio versus shear strain of the studied materials under low loading frequency (i.e. 0.5 Hz) almost falls in the range identified in literature. However, at higher loading frequencies (5 and 10 Hz) the damping ratios completely fall above the known upper bound trend. It is observed that, in general, the G and D values increase as loading frequency increases. Moreover, at certain strain G/Gmax ratio decreases as loading frequency is increased.
Different dynamics behaviour curves were used in analyses, in isotropic consolidation conditions. In order to assess the amplification, acceleration spectra, acceleration spectra ratio, coefficient of B, at ground surface under eight well-known near-fault ground motions, 1728 one dimensional analyses were carried out with EERA code. The analyses have been performed for three base acceleration levels, namely, 0.1 g, 0.35 g and 1 g, using the simple time history scaling method. Field and laboratory test results of shear wave velocity were used in the analyses.
In this study, several well-known near-fault motion records are utilized for ground response analyses. Near-fault earthquakes records were selected from the strong motion database of the Pacific Earthquake Engineering Research Center (PEER) and Iran Strong Motion Network (ISMN) for specific reasons of location of the near faults sites.
In current building codes, the upper 30 m soil deposits overlying the higher impedance earth crust are regarded as the most relevant and significant in characterizing the seismic behavior of a site. Therefore, it is useful to accomplish investigations for obtaining their amplification and spectral acceleration for 30 m and even thicker (e.g. 60 m, for usual deep excavation in Iran), in order to have economical and safe designs and constructions.
Results and discussion
Figure 1 presents a comparison of normalized spectral acceleration (B factor) versus period for 30 m and 60 m thick profiles and Vs testing for frequencies dependent and independent analyses under input base acceleration of 0.35g for longitudinal component of used earthquakes. B factor of Iranian Standard 2800 and UBC97 also has been presented in the figure. The spectral acceleration at short period for frequency dependent analysis is higher than that of the frequency independent analysis. The  increases in frequency dependent analysis and higher thick profile (i.e. 60 m).
Conclusion
Results show that the effect of loading frequency has a considerable influence on the acceleration response at the ground surface. For both 30 m and 60 m soil columns, the increase of the loading frequency, decreases the amplification factor especially in the short period zone of the spectra. Based on the acceleration response spectra of near field strong motions derived for soils types of I and IV in this study, the period corresponding to  in the design spectrum of Iranian Standard 2800 should increase to 0.5 and 1.4, respectively. Therefore, selection of the appropriate G and D curves measured at frequency similar to those of the anticipated cyclic loading (e.g. seismic) has a paramount importance../files/site1/files/134/1.pdf
Ms Roghayeh Hasani, Dr Ebrahim Asghari-Kaljahi, Dr Sina Majidiana,
Volume 18, Issue 2 (Summer 2024)
Abstract

With the expansion of the petroleum industry and the aging of facilities and pipelines, oil spills are becoming more frequent. In addition to environmental impacts, oil spills can cause changes in the plasticity and dispersivity of soils. To investigate the potential for dispersion in fine-grained soils due to oil leakage, soil samples were collected from the Shazand Refinery area in Arak and mixed with 0, 5, 10, 15, and 20% by weight crude oil. Specimens were prepared at the maximum dry density obtained from the Proctor compaction test and, after curing, pinhole and double hydrometer tests were conducted. The results of the mentioned tests showed that the fine-grained soil tends to disperse with the addition of up to 15% oil, and this dispersion increases with further increases to 20%. Changes in the soil fabric with increasing oil content were investigated using scanning electron microscopy (SEM) images, and the results showed that the dispersion of soil particles increased with increasing oil content.


Page 1 from 1     

© 2024 CC BY-NC 4.0 | Journal of Engineering Geology

Designed & Developed by : Yektaweb