Search published articles


Showing 3 results for Source

Ata Shakeri, Fahimeh Yousefi,
Volume 12, Issue 1 (8-2018)
Abstract

Extended Abstract
Introduction
The presence of potentially toxic elements in the environment and especially in soil has been one of the greatest concerns due to their health implications. Potentially toxic elements from anthropogenic sources tend to be more mobile than those from lithogenic or pedogenic sources.  Generally, the distribution of potentially toxic elements is influenced by the nature of parent materials, climatic conditions, and their relative mobility depending on soil parameters, such as mineralogy, texture and class of soil. In the inhabited, and industrial areas, vicinity to the un-engineered landfills, excess accumulation of toxic elements in surface soils can directly threaten wellbeing of exposed inhabitants via ingestion, inhalation and dermal contact routes. A few studies conducted on risk assessment of potentially toxic elements in soils of Kermanshah province, west of Iran. Soil in the study area is susceptible to contamination by anthropogenic activities in the form of industrial wastewater, agricultural activities, solid waste, runoff, atmospheric deposition and especially un-engineered landfills. The presence of toxic elements in soil around of un-engineered landfills without proper consideration to the environmental protection measures, will certainly lead to a significant environmental hazard in Kermanshah province. Therefore, the main purposes of this study are to evaluate the contamination levels, health risk assessment, and source identification of As, Cd, Cr, Cu, Ni, Pb and Zn in the Gasre Shirin, Gilane Gharb, Paveh, Javanrood, Eslamshahr, Ravansar, Kermanshah and Sanghar un-engineered landfills.
 
Material and methods
     A total of 30 topsoil samples were collected (0-20 cm depth) from the eight un-engineered landfills of the Kermanshah province. In order to achieve a representative sample, composite samples were prepared by mixing the four subsamples taken at each corners of 2×2 m square cell because composite sampling yields homogenized samples for analyses. The subsamples were mixed and a final sample of 1 kg was taken by repeated coning and quartering. To determine background concentration of heavy metals, eight soil samples were collected from areas far from known sources of contamination (40-60 cm depth).
The collected samples were immediately stored in polyethylene bags and air-dried in the laboratory at room temperature. Then, samples passed through a 2mm stainless steel sieve. The <2mm fraction was ground in an agate mortar and pestle and passed through a 63 micron sieve. In order to determine the concentration of As, Cd, Cr, Cu, Ni, Pb and Zn complete dissolution of soil samples (approximately 1 g of each) was carried out using a mixture of HF, HNO3, HClO4 and H2O2 in a Teflon beaker on sand bath at atmospheric pressure. The concentrations of the selected elements were measured by an accredited commercial laboratory (Zar Azma Laboratory, Iran) using ICP-MS methods. Data quality was ensured through the use of internal duplicates, blanks, and HRM. The precision and accuracy of measurements are 95% and +/-5% respectively.
The assessment of soil contamination was carried out using geochemical indices including contamination factor (CF), modified degree of contamination (mCd) and enrichment factor (EF). The methodology used for the health risk assessment was based on the guidelines and Exposure Factors Handbook of US Environmental Protection Agency. The average daily doses (ADDs) of heavy metals received through ingestion, inhalation, and dermal contact for both adults and children were calculated. In this study, hazard quotient (HQ), hazard index (HI) and carcinogenic risk (RI) methods were used to estimate non-carcinogenic and carcinogenic effects of heavy metals. The HQ was calculated by subdividing ADD of a heavy metal to its reference dose (RfD) for the same exposure pathway(s). If the ADD exceeds the RfD, HQ>1, it is likely that there will be adverse health effects, whereas if the ADD is less than the RfD, HQ<1, it is considered that there will be no adverse health effects. A hazard index (HI), the sum of HQs, which means the total risk of non- carcinogenic element via three exposure pathways for single element of <1 indicates no adverse health effects, while HI values >1 show possible adverse health effects. Carcinogenic risk is regarded as the probability of an individual developing any type of cancer in the whole life time due to exposure to carcinogenic hazards and was calculated for As and Cd as follows:
                                                                   (1)
The value of SF represents the probability of developing cancer per unit exposure level of mg/kg day. The acceptable risk range for carcinogens is set to 10-6 to by the USEPA, so that RI values below 10-6 do not require further action, while risks greater than 10-4 are considered to be of concern and require additional action to reduce the exposure and resulting risk.
Results and discussion
The soil pH ranges from 7.01 to 8.06, with an average value of 7.51 suggesting neutral conditions. Organic carbon (OC) contents of soil samples ranged from 0.06% to 4.91% (average 1.59%). In this study, based on the USDA textural triangle the main soil textures are loamy, clay loam and sandy loam, respectively.
The average abundance order of selected elements content is: Zn>Ni>Pb>Cr>Cu>As>Cd. Comparison of mean concentration of the potentially toxic elements in the soil samples with mean worldwide values reveals higher Zn, Pb and Ni contents in this area.
The results of contamination factor indicate very high contamination for Cd, Cu, Pb and Zn. Modified Degree of Contamination (mCd) calculated based on background values proves very high degrees of contamination for selected trace elements in Gasre Shirin and Eslamshahr landfills soil samples The results of enrichment factor evaluation similarity to contamination factor indicate that Cd, Cr, Pb, Cu and Zn have more influence from anthropogenic sources. The maximum EF of Pb, Zn and Cd and Cu is 346.7,124 and 51.9 respectively, which means very high enrichment in Ghasre Shirin landfill soil samples.
Exposure doses of 7 heavy metals in soil samples of un-enggenerd landfills for children and adults were calculated. The total exposure HQs calculated based on adults from ingestion, dermal contact, and inhalation for Cd, Cu, Ni, Zn, As and Pb was less than 1(except Ghasreshirin landfill). The hazard quotient values based on the adult risk for Cr were greater than 1.0. The results show that HQ for Pb and As in children by dermal and ingestion pathway is exceeded 1.0 in soil samples of Paveh, Javanrood, Ravansar, Kermanshah and Sangher landfills and Ghasreshirin and Eslamshahr landfills, respectively.
Conclusion
The concentration, pollution level, potential sources and health risk of potentially toxic elements in eight landfills top soil of Kermanshah province were investigated in this study. The following conclusions were drawn from this research.
- Compared with the background values of As, Cd, Cr, Cu, Ni, Pb and Zn in soils of Kermanshah Province, landfills soil have elevated metal concentrations as a whole.
- According to high contamination level and health risk of some studied potentially toxic elements, and also due to the proximity of contamination sources to residential district of the study area, more attention should be paid to manage and reduce contamination.
- These results provide basic information of toxic elements pollution control and environment management in the area../files/site1/files/121/Shakerii_Abstract.pdf
Ramin Sarikhani, Amin Jamshidi, Artimes Ghasemi Dehnavi ,
Volume 14, Issue 5 (12-2020)
Abstract

Groundwater salinization in semiarid regions is a limiting factor of use with strategic importance. In this study, the sources of salinity, chemistry, and quality of groundwater in Robat (Khorramabad plain, Iran) were identified through the geochemical methods. Using data analysis, the concentration of cations and anions were recognized with the order of Ca2+>Na+ >Mg2+>K+ and HCO3-> Cl-> SO42+> NO3-> F-, respectively. The high concentration of Na+, Cl-, and EC in some places is attributed to the gypsum and salty formations. In the study area, the salinization processes are identified by natural and artificial activities. The salinization mechanisms are identified by the natural dissolution of gypsum and salt from Gachsaran formation and man-made sources including boreholes drilled through Gachsaran Formation, salt mining, and agricultural activity. Also, the high concentration of nitrate is related to agricultural fertilizers and karstification effects. It is seen that the atmospheric NO3-. HCO3-, Ca2+, and Mg2+ concentration exceeded the standard limit in a few samples probably due to the calcareous formation. Besides, hydrochemical facies of the groundwater are Ca- HCO3 and Na-K-HCO3. Due to the presence of calcareous and salt bearing formations, 46%, 26%, and 20% of all samples show a higher concentration of Ca2+, Na+, and Mg2+, respectively, which exceed the permissible limits. Sulfate and fluoride concentrations are less than the permissible limits. However, due to the presence of calcareous formation, salt bearing formation, and use of agricultural fertilizers, 100%, 26%, and 20% of all samples show a higher concentration of HCO3-, Cl-, and NO3- than the permissible limits.
Kamal Ganjalipour, Reza Azimi, Mojtaba Moradi,
Volume 18, Issue 1 (5-2024)
Abstract

In determining the water that can be allocated for different uses, including agriculture (as the main consumer), the most important step in this era is the proper management of groundwater resources. The observance of water consumption within the limit of allocated water ensures that the consequences of the exploitation of groundwater resources and the sustainability of development are guaranteed, and operators use technological methods to increase the efficiency of using water resources for more production in proportion to the amount tend to available water. In this article, first, the method of calculating the water allocated to the agricultural sector in the country has been studied and criticized. In this study, it was found that in the formula for calculating the current allocated water, the component of agricultural return water as an effective parameter causes a huge error in the calculation of allocated water. Then, a new formula for the calculation of allocated water was proposed, and an attempt was made to correct and apply the effect of the input component of agricultural return water on the amount of allocated water based on the calculation of allocated water in the new proposed method, taking into account the aquifer capacity based on the parameters of the water resources balance.


Page 1 from 1     

© 2024 CC BY-NC 4.0 | Journal of Engineering Geology

Designed & Developed by : Yektaweb