modern research physics

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

---

Biosurfactants are products of broad range of microorganisms. These compounds are surface active. Glycolipids, Phospholipids & Fatty acids, Lipopeptids and Lipoproteins, Polymeric biosurfactants and Special Biosurfactants are main types of biosurfactants. Rhamnolipid is a type of Glycolipids that is produced by Pseudomonas aeruginosa. In the present paper, P. aeruginosa MM1011 was obtained from Persian Type Culture Collection (Biotechnology Center, IROST). The aim of this investigation was optimization of mineral salts medium with sugar beet molasses to produce rhamnolipid considering specific parameters. such as: C/N, Temperature, pH, shaking rate, and Inoculation size. Since P. aeruginosa is Suc.(-), it was mutated to be able to use the sucrose as carbon source. The molasses treated chemically, then used by the bacterium. The results assayed by phenol-sulfuric acid method, and crude oil emulsification capability. Results of ANOVA. Depicted results showd that the optimum conditions without molasses is: temp.:33˚c, pH 7, C/N:18, shaking rate: 200 rpm and inoculom: 2% in 96 hours and the best medium is 3M which contained sugar beet molasses. Further investigation proved that the best production temperature is 33°c when pH is 6.8, shaking rate: 200 rpm, C/N: 16, inoculom: 2%. Using the above mentioned factors, the obtained results showed that the produced rhamnose was 0.22 g/L (rhamnolipid = 0.66 g /L) and crude oil emulcification was 55.5 %.

Keywords: biosurfactant, Rhamnolipid, Pseudomonas aeruginosa, Sugar Beet Molasses

Full-Text [PDF 202 kb]   (1525 Downloads)    

Add your comments about this article : Your username or Email:

---